Hi, I have a 16 channel multiswitch with only one SWM port going to an 8 way splitter. I have the hR44 Genie (clients) and a few other DIRECTV boxes on the 8 way. All works great. I need to move one of the Genie clients and it is a short easy coax run to plug it into the other empty SWM port on the 16 multiswitch. I have done this and now have issues with that client. It freezes on one channel and the remote will not work. If I switch genie clients, it seems to work fine after turning off, it seems to lose network when turn back on and is frozen again. Aren't the two SWM outputs on the multiswitch internally connected as one network? Any thoughts appreciated before I have to run a bunch of coax and split a line. Thanks
↧