had a large yagi for one channel. decided to use a rotor for more. When I first installed router and removed the VHF I noticed only one conductor was connected to the yagi. Hooked it back up installed rotor and came down smiling. check TV, nothing. Ran rotor around, nothing! Checked connections, nothing! skipping a bunch of stuff. I found antenna would only work with one side connected, same with twin lead and coax. took yagi down cleaned corrosion and tightened it up. Nothing! Works with one conductor but not both.changed antennas, nothing! ran a jumper bypassing all the wiring, still nothing, The only thing I can think of that's common is the mast and ground. I'll check that tomorrow. Other than that I;m stumped, Any ideas?
↧