Hello,
My three client receivers (H25-700) have suddenly started showing error 775. The main DVR (HR34-700) is fine. I had some power outages at my home prior to this occurrence. I also have a CCK.
The HR34 shows SWiM detected and functions normally. It does not show any of the receivers on the network. CCK appears to be working normally. SWiM shows green light and outputs 20.7 v
I have done the normal troubleshooting/reset (unplugged all, including SWIM, turned back on one at a time). Nothing was physically moved. Seems odd that the receivers would all have failed and the HR34 is fine.
Could the 8 way switch connected to SWiM have cooked and still be powering LNB and providing signal to HR34 but not the receivers?
I would welcome any ideas. I have had 775 errors in the past (cabling in my house installed by previous owner is not all accessible and may be crazy). Wonder if I would be better off just ponying up for wireless genie receivers - but would also like to avoid if possible.
Thank you,
Tom:confused:
My three client receivers (H25-700) have suddenly started showing error 775. The main DVR (HR34-700) is fine. I had some power outages at my home prior to this occurrence. I also have a CCK.
The HR34 shows SWiM detected and functions normally. It does not show any of the receivers on the network. CCK appears to be working normally. SWiM shows green light and outputs 20.7 v
I have done the normal troubleshooting/reset (unplugged all, including SWIM, turned back on one at a time). Nothing was physically moved. Seems odd that the receivers would all have failed and the HR34 is fine.
Could the 8 way switch connected to SWiM have cooked and still be powering LNB and providing signal to HR34 but not the receivers?
I would welcome any ideas. I have had 775 errors in the past (cabling in my house installed by previous owner is not all accessible and may be crazy). Wonder if I would be better off just ponying up for wireless genie receivers - but would also like to avoid if possible.
Thank you,
Tom:confused: