I am not receiving any UHF channels at all.
I ordered and installed everything Solid Signal recommended to me. I am only running one TV on the system at the moment. The antenna is approximately 20' above the ground on a wall mount and is about 5' above the wall mount and roof line. The antenna has a 75 ohm F connection and my coax connects directly to it.
I have approximately 40' of cable once it enters the house to the TV that I have connected. About half way (~20') to the TV is where the gain control and distribution amp is installed (in basement).
I have a rather large tree in the back yard about 75 feet away from the antenna, which is just to the left of the LOS to the tower and then some other large trees about a 1/4 mile away. The TV I am using is a SONY Bravia HDTV, but I have also tried an LG HDTV with the same results.
I am only trying to get the channels from one tower 219 degrees SW and from the database, I should be able to pick them all up. I live a little under 9 miles from the tower. I pointed the antenna with a compass on my iphone and have excellent reception on the VHF channels, but cannot pick up any UHF channels.
I am currently only getting 5 channels: 10.1,10.2, 10.3, 13.1 and 13.2 -(all VHF channels). The UHF signals are coming from the same tower.
What could be restricting all the UHF channels from being received?
I ordered and installed everything Solid Signal recommended to me. I am only running one TV on the system at the moment. The antenna is approximately 20' above the ground on a wall mount and is about 5' above the wall mount and roof line. The antenna has a 75 ohm F connection and my coax connects directly to it.
I have approximately 40' of cable once it enters the house to the TV that I have connected. About half way (~20') to the TV is where the gain control and distribution amp is installed (in basement).
I have a rather large tree in the back yard about 75 feet away from the antenna, which is just to the left of the LOS to the tower and then some other large trees about a 1/4 mile away. The TV I am using is a SONY Bravia HDTV, but I have also tried an LG HDTV with the same results.
I am only trying to get the channels from one tower 219 degrees SW and from the database, I should be able to pick them all up. I live a little under 9 miles from the tower. I pointed the antenna with a compass on my iphone and have excellent reception on the VHF channels, but cannot pick up any UHF channels.
I am currently only getting 5 channels: 10.1,10.2, 10.3, 13.1 and 13.2 -(all VHF channels). The UHF signals are coming from the same tower.
What could be restricting all the UHF channels from being received?