I work for a company that requires a dedicated SWiM line to every desk. With 50 desks, that makes for a lot of power supplies. So, I built a power distribution panel that distributes power from two or three, 320-Watt 24v power supplies to 56 F connectors. Each power supply should be able to power 18x SWiM16s, according to Sonora's power sheet (sorry, I can't post a link yet).
So as to support newer hardware, we also will need DSWiM 13 lines to all the desks, but the power situation is far less clear. The power supplies I'm using can be turned up to 26.4v, but the DSWiM13 says it wants 29v. Does anyone know if it will run on 26v, and how much current it requires. This install will have a polarity locker, so the DSWiM does not need to power the LNB on the dish.
Thanks,
- Alex
So as to support newer hardware, we also will need DSWiM 13 lines to all the desks, but the power situation is far less clear. The power supplies I'm using can be turned up to 26.4v, but the DSWiM13 says it wants 29v. Does anyone know if it will run on 26v, and how much current it requires. This install will have a polarity locker, so the DSWiM does not need to power the LNB on the dish.
Thanks,
- Alex